| | Swing | 280 | mm |
| | Swing by using of the positioning plate | 370 | mm |
| | Distance between the headstock centre and tailstock centre | 500 | mm |
| | Distance between teilstock centres | 690 | mm |
| | Tailsstock centre ax above the table | 130 | mm |
| | Tailstock centre ax from the table back side | 55 | mm |
| | Spindle tapers | 60 | metric. |
| | | 5 | Morse |
| | Ordinary dimensions of the grinding disk : | | |
| | Outside diameter | 150 | mm |
| | Inside diameter | 20 | mm |
| | Longitudinal motion of the table | 440 | mm |
| | Transvérse motion of the table | 240 | mm |
| | Table displacement | 90 | ° |
| | Table surface | 920x140 | mm |
| | Vertical motion of the grinding spindle | 230 | mm |
| | Spindle angle shift | 350 | st. |
| | Grinding spindle revolutions : | | |
| | I.stage | 2800 | ot/min |
| | II.stage | 5600 | ot/min |
| | Motor output | 0,7 / 1,2 | kW |
| | Working headstock swing - | | |
| | horizontally, vertically | 360 | st. |
